All Products

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

Self Adhesive - Wool Mix - Approximate Length 30cm - width 33cm = 11.3/4 inches x 13 inches..

1:12 Scale - Wool Mix with Self Adhesive Backing - Approximate width 50mm Length 600mm = 2 x 23.9/16 inches..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Ki..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Ki..

1:12 Scale - Resin - Approximate length of shoe 23mm = 13/16 inches..

1:12 Scale - Resin - Set of 6 - Approximate height 30mm = 1.1/4 inches..

U.S./Canadian Transformers CK1009D(UL)Cir-Kit table top transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug into a powered outlet, thus eliminating the need of building a special transformer enclosure wi..

U.S./Canadian TransformersThese transformers have straight blade pins and are designed primarily for the U.S., Canada, and Mexico, as well as certain other countries, such as Japan.Cir-Kit plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Ki..

1:12 Scale - Wooden - Fits right or left wall - 12 treads - Approximate Width 75mm Length 305mm = 2.31/32 x 12 inches - Additional tread included to total 13 treads and 330mm / 13 inches long..

1:12 Scale - Wooden - Approximate length 583mm x height 50mm = 22.15/16 inches x 2 inches..

1:12 Scale - Wooden - Approximate length 150mm - 5.7/8 inches..

1:12 Scale - To be used with a 12 volt transformer - Approximate width 100mm = 4 inches - Replacement bulbs can be bought at Melody Jane Dolls Houses..

A 12V Lighting Socket Strip for use with dolls house lights. Comes complete with:Fuse, On / Off switch and indicator bulb.The indicator light on these strips is a 'blown fuse' indicator.The light should be off, if it lights it is probable that the fuse has blown, possibly due to a short-circuit.Repl..

1:12 Scale - 5 Piece Porcelain Set - Bath Tub width 54mm - length 138mm - height 45mm = 2.1/8 x 5.3/8 x 1.3/4 inches..

Miniature Lighting Accessory - 32 Gauge - 2 Conductor Wire - Approximate length 50' = 15M..

1:12 Scale - Wooden Base with a wallpapered board back that just slots into place, no glue or screws needed. Can be taken off and flat packed when not in use. Approximate width 36cm height 23cm Depth 21cm = 14 x 9 x 8.1/14 inches..

1:12 Scale - Plastic & Metal - base width 52mm = 2 inches - Approximate height 75mm to 100mm = 3 to 4 inches..

Self Adhesive - Approximate Length 30cm - width 30cm = 11.3/4 inches x 11.3/4 inches..

1:12 Scale - The next generation of LED lamps. This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. The result is a range of Lamps with a pleasant warm glow, very similar to the normal Tungsten Filament bulb. Height 70mm - 2.3/4""We recommend purchasing ou..

1:12 Scale - Approximate Height 44mm = 1.3/4 inches To Replace the battery unscrew the base of lamp.Replacement batteries CR1632 can be bought from Melody Jane Dolls HousesWe recommend purchasing our magnetic discs to attach the light neatly and securely to your dolls house ceiling, wall or table or..

1:12 Scale - Approximate Height 52mm = 2.1/16 inchesTo Replace the battery unscrew the base of lamp.Spare batteries CR1632 can be bought at Melody Jane Dolls Houses.We recommend purchasing our magnetic discs to attach the light neatly and securely to your dolls house ceiling, wall or table or where ..

1:12 Scale - Height 63mm = 2.1/2 inches - 12V Comes with standard white plug and white wires approximate length 600mm = 23.1/2 inches - Easy replaceable bi pin bulb - Can be bought at Melody Jane Dolls Houses..

100 pack of Brads perfect for your dolls house. 1/4 inches = 6mm in length..

1:12 Scale - Wooden - Approximate height 42mm not including chains = 1.5/8 inches..