Special Offers

1:12 Scale - Metal - Fitted with bulb and 3V battery Height 43mm - 1.3/4" Comes with an adhesive backed magnet to be stuck to a wall, ceiling, table or where ever you want to position your light. The lamp then snaps on to the magnet. When you need to switch off or on, remove the lamp from the magne..

1:12 Scale - Metal - Lid comes off - Approximate width 23mm = 29/32 inches..

1:12 Scale - Resin - Approximate length of shoe 22mm = 7/8 inch..

1:12 Scale - Metal - Lid comes off - Approximate width including handles 37mm = 1.7/16 inches..

1:12 Scale - Metal - Lid comes off - Approximate width including handles 35mm - 1.3/8 inches..

1:12 Scale - Metal - Lids do come off - width of largest pan including handles 37mm - 1.1/2 inches..

1:12 Scale - Plastic - Approximate length 45mm = 1.3/4 inches..

1:12 Scale - Metal, resin & plastic - Approximate width 30mm = 1.1/8 inches..

1:12 Scale - Approximate height 30mm = 1.3/16 inches - 12V Comes with standard white plug and white wires approximate length 600mm = 23.1/2 inches - Easy replaceable bi pin bulb - Can be bought at Melody Jane Dolls Houses ..

1:12 Scale - Resin - Approximate height 30mm = 1.3/16 inches..

1:12 Scale - Metal - Approximate height of tallest pot 20mm = 3/4 inches..

1:12 Scale - Lid does come off - Metal - Approximate height 27mm = 1.1/16 inches..

1:12 Scale - It is on a wire - Approximate length 200cm = 2m..

1:12 Scale - Metal - Approximate height of toaster 16mm width 19mm = 5/8 x 3/4inches..

1:12 Scale - Wooden - Approximate width 50mm - depth 50mm - height 77mm = 2 inches x 2 inches x 3 inches..

1:12 Scale - Quality miniatures from Reutters of Germany - Metal - Approximate shelf width 63mm - height 30mm = 2.1/2 inches x 1.3/16 inches..

1:12 Scale - Polished White Metal - Lid comes off - Approximate height 31mm = 1.1/4 inches..

1:12 Scale - Resin - Approximate width 33mm = 1.5/16 inches..

1:12 Scale - Resin - Approximate height 32mm width 32mm = 1.1/4 x 1.1/4 inches..

1:12 Scale - To be used with a 12 volt transformer - Approximate height 27mm = 1 inches - Replacement bulbs can be bought at Melody Jane Dolls Houses..

1:12 Scale - Wooden - Door does not open - Approximate height 67mm width 50mm = 2.5/8 inches x 2 inches..

1:12 Scale - Wooden - Door does not open - height 70mm - 2.3/4 inches..

1:12 Scale - Plastic - Wheel goes round - Approximate height from floor to handle 52mm - 2.1./16 inches - width 52mm - 2.1./16 inches..

1:12 Scale - Length 91cm - 36 inches..

Approximately 40g - Ideal for railways and wargamers as well as dolls houses..

1:12 Scale - Wooden with styrene shelves - width 120mm depth 42mm height 196mm = 4.3/4 x 1.5/8 x 7.3/4 inches..

1:12 Scale - Wooden - Ready to paint or stain - Classics - width 120mm - length 160mm = 4.3/4 inches x 6.1/4 inches..

1:12 Scale - Metal - Approximate Length 27mm Depth 22mm Height 33mm = 1.1/16 x 7/8 x 1.5/16 inches..

1:12 Scale - Approximate height 48mm = 1.7/8 inch - Battery included - To Replace the battery unscrew the base of lamp. Replacement batteries CR1632 can be bought at Melody Jane Dolls HousesWe recommend purchasing our magnetic discs to attach the light neatly and securely to your dolls house ceiling..

1:12 Scale - The next generation of LED lamps. This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. The result is a range of Lamps with a pleasant warm glow, very similar to the normal Tungsten Filament bulb. Height 26mm - 1 inchesWe recommend purchasing ..

1:12 Scale - Fabric - approximate width 80mm - length 140mm = 3.1/8 x 5.1/2 inches..

1:12 Scale - Plastic - approximate width of largest plate 18mm = 11/16 inches - 10 pieces..

1:12 Scale - Wooden -  JBM MiniatureSleigh Bed from the Bedroom in the palace of Ferdinand 11Highly decorated with classical ornamentation of angels and extensive use of gold around the sides of the bed. The bed stands on scrolled legs shaped to resemble a dragon with Paw feet. The wings o..