All Products

1:12 Scale - Hand Made in Britain by Mrs Denton at Muffin Lodge - Width 25mm = 1 inches..

1:12 Scale - Hand Made in Britain by Mrs Denton at Muffin Lodge length 40mm - width 35mm = 1.9/16 inches x 1.3/8 inches..

1:12 Scale - Hand Made in Britain by Mrs Denton at Muffin Lodge - Length of tray 59mm = 2.1/4..

1:12 Scale - Hand Made in Britain by Mrs Denton Muffin Lodge - length 75mm - 3 inches..

1:12 Scale - The next generation of LED lamps. This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. The result is a range of Lamps with a pleasant warm glow, very similar to the normal Tungsten Filament bulb. Width of shade 36mm - 1.3/8"We recommend purcha..

1:12 Scale - The next generation of LED lamps. This range of new LED's have been updated with a bigger and brighter LED, plus a larger battery. The result is a range of Lamps with a pleasant warm glow, very similar to the normal Tungsten Filament bulb. Height 47mm - 1.7/8" We recommend purchasing ..

1:12 Scale - Metal - 6.3mm wide = 1/4 inches - 9.6mm long = 3/8 inches..

1:12 Scale - Wooden with fabric covered board - length 105mm = 4.1/8 inches - height 75mm = 3 inches..

1:12 Scale - Wooden - Vinyl Upholstery - Length 90mm - 3.1/2 inches..

1:12 Scale - Resin - 25mm = 1 inches..

1:12 Scale - Wooden - length without handle 32mm - 1.1/4 inches..

1:12 Scale - 1.3/4 inches high = 45mm..

Covers 72 square inches = 465cm - as pictured on the sheet end to end 30.5cm x 15cm = 12 inches x 6 inches - Each brick 19mm x 6mm = 3/4 inches x 1/1/4 inches - depth is approximately 5mm..

1:12 Scale - Wooden - Drawers doors open - width 135mm - height 160mm = 5.1/4 inches x 6.1/4 inches..

1:12 Scale - Die Cast Miniature - also a pencil sharpener - width 40mm - depth 37mm - height 61mm = 1.9/16 inches x 1.1/4 inches x 2.3/8 inches..

1:12 Scale - Resin - Approximate height 12mm = 1/2 inches..

1:12 Scale - Set of 3 - Wooden - height 50mm - length 304mm - 2 inches x 12 inches..

1:12 Scale - Wooden unit - Doors open - Accessories cannot be removed - width 70mm - height 155mm = 2.3/4 inches x 6.1/8 inches..

1:12 Scale - Wooden - Width 33mm = 1.1/4 inches..

1:12 Scale - Merry Meeting Doll - Porcelain head and lower limbs, soft wired body - Height 130mm - 5.1/8 inches..

1:12 Scale - Metal & plastic - width 16mm = 5/8 inches..

1:24 Scale - Plastic red wine glasses - Height 8mm = 5/16 inches - Base of glass May need rubbing on some fine sandpaper to make them stand flat..

1:24 Scale - Metal & Fabric - Length - 40mm, Width - 25mm, Depth - 30mm..

1:24 Scale - Metal - Length 16mm = 5/8 inches..

1:24 Scale - Metal - Width 13mm = 1/2 inches..

1:12 Scale - Soft plastic/rubber - Approximate Height 55mm = 2.3/16 inches - Colours may vary..

1:24 Scale - Metal - Dresser width 42mm - height 75mm = 1.5/8 inches x 3 inches..

1:12 Scale - Resin - Length 15mm = 9/16 inches..

1:12 Scale - Resin - Length 10mm = 3/8 inches..

1:24 Scale - Metal - Height of Chairs 40mm = 1.9/16 inches..

1:24 Scale - Plastic - Magnetic - Height 50mm 2 inches..

1:24 Scale - Plastic - Magnetic - Width of Table 45mm = 1.3/4 inches..